Fly-Super8Pro H723 Pin map
Edit me

Fly-Super8Pro H723 Pinout Diagram

Fly-Super 8 pins
Fly-Super 8 Pinout
Fly-Super 8 Pins

Fly-Super8Pro H723 Driver Pins in Firmware

Driver pin numbers. They are separated into driver number.

Pin Type 0(X) 1(Y) 2(Z) 3(E0) 4(E1) 5(E2) 6(E3) 7(E4)
Enable Pins PF11 PF14 PG1 PE9 PF2 PC15 PG4 PG7
Step Pins PE2 PE3 PE4 PE14 PE15 PE1 PE0 PE6
Direction Pins PC5 PF13 PG0 PE8 PE11 PF0 PG3 PG6
UART Pins PC4 PF12 PF15 PE7 PE10 PF1 PG2 PG5

Fly-Super8Pro H723 Other Pins in Firmware

If more than one pin name is availble, either name can be used in the firmware (config.g).
If the pins aren’t in the table (due to not having a special name), then the pin itself can be used in the form of PA0, PA.0, PA_0, A0, A.0 or A_0.

Pin Number Pin Name 1 Pin Name 2 Pin Name 3 Klipper Alias
PA0 fan0     FAN0
PA1 fan1     FAN1
PA10 RX1      
PA15 fan4     FAN4
PA2 fan2     FAN2
PA3 fan3     FAN3
PA4 LCD_SS     EXP2_4
PA5 LCD_SCK     EXP2_2
PA8 io6      
PA9 TX1      
PB0 heat0     HEAT0
PB1 heat1     HEAT1
PB10 fan6     FAN6
PB11 fan5     FAN5
PB2 LCD_EN     EXP1_3
PB3 MOT_SCK      
PB4 MOT_MISO      
PB5 MOT_MOSI      
PB6 BTN_EN2     EXP2_5
PB7 BTN_EN1     EXP2_3
PC0 ADC_4 out4   HEAT4_TEMP
PC1 ADC_5 out5   BED_TEMP
PC13 LCD_D5     EXP1_6
PC14 LCD_D4     EXP1_5
PC3 probe     PROBE
PC6 pwm_out0 pwm0 out0 SERVO
PC7 heat2     HEAT2
PD12 fan7     FAN7
PD14 fan8     FAN8
PD15 fan9     FAN9
PD6 io5      
PD7 io4      
PE12 BEEP     EXP1_1
PE13 BTN_ENC     EXP1_2
PE5 bedout bed   BED_OUT
PF3 hvin      
PF4 ADC_0 out0   HEAT0_TEMP
PF5 ADC_1 out1   HEAT1_TEMP
PF6 heat4     HEAT4
PF7 heat3     HEAT3
PF8 in7 pwm_out1 pwm1 out1
PF9 ADC_2 pwm_out2 pwm2 HEAT2_TEMP
PF10 ADC_3 out3   HEAT3_TEMP
PG10 io2     E_STOP
PG11 io1     Y_STOP
PG12 io0     X_STOP
PG13 LCD_D7     EXP1_8
PG14 LCD_D6     EXP1_7
PG15 LCD_CD     EXP2_7
PG8 LCD_RS     EXP1_4
PG9 io3     Z_STOP
<GND> GND     EXP1_9
<GND> GND     EXP2_9
<5V> 5 VOLTS     EXP1_10
<5V> 5 VOLTS     EXP2_10
<RST> RESET     EXP2_8