Preparing the SD Card
Edit me

Preparing the SD Card

Tools and software needed

Writing the image

  • If have not already done so install the Balena Etcher software.
  • Download the FlyOS image from https://mellow.klipper.cn
  • Attach the SD card reader and insert the Mini SD card.
  • Open Belana Etcher, click “Flash from file” to select the system image file downloaded earlier.
Belana Etcher: Flash from file.
Belana Etcher: Flash from file.
  • Under “Select target” check the boxto select the SD card then click “Select”, the size should be about the same as the capacity of the SD card. If you are unsure open the resource manager to view the drive letter of the SD card
Belana Etcher: Select Target.
Belana Etcher: Select Target.

  • Click “Flash”, when the progress bar appears it will start writing the system image to the SD card

  • Wait for the flash to complete, you can skip the verification step and eject the SD card

  • The SD card can now be inserted into the Fly-Gemini V2
  • Your Fly-Gemini V2 is ready to start up.
Tags: