Fly-Super5Pro Pin map
Edit me
Fly-Super5Pro Pinout Diagram
Fly-Super5Pro Driver Pins in Firmware
Driver pin numbers. They are separated into driver number.
| Pin Type | 0(X) | 1(Y) | 2(Z) | 3(E0) | 4(E1) |
|---|---|---|---|---|---|
| Step Pins | PE14 | PE11 | PE7 | PE4 | PE1 |
| Direction Pins | PE15 | PE12 | PE8 | PE5 | PE2 |
| Enable Pins | PB11 | PE13 | PE9 | PC1 | PE3 |
| UART Pins | PB10 | PE10 | PA4 | PC0 | PE0 |
Fly-Super5Pro Other Pins in Firmware
If more than one pin name is availble, either name can be used in the firmware (config.g).
If the pins aren’t in the table (due to not having a special name), then the pin itself can be used in the form of PA0, PA.0, PA_0, A0, A.0 or A_0.
| Pin Number | Pin Name 1 | Klipper Alias |
|---|---|---|
| PC4 | ADC0 | HEAT0_TEMP |
| PC5 | ADC1 | HEAT1_TEMP |
| PB1 | ADC2 | BED_TEMP |
| PB7 | IO0 | X_STOP |
| PC7 | IO1 | Y_STOP |
| PC6 | IO2 | Z_STOP |
| PC13 | IO3 | E_STOP |
| PC14 | IO4 | |
| PC15 | IO5 | |
| PB2 | NEOPIXEL | |
| PE6 | SERVO0 | SERVO |
| PC2 | probe | PROBE |
| PD12 | heat0 | HEAT0 |
| PD13 | heat1 | HEAT1 |
| PB0 | bedout | BED_OUT |
| PA0 | fan0 | FAN0 |
| PA1 | fan1 | FAN1 |
| PA2 | fan2 | FAN2 |
| PA3 | fan3 | FAN3 |
| PA8 | BEEP | EXP1_1 |
| PA13 | BTNENC | EXP1_2 |
| PA15 | LCDEN | EXP1_3 |
| PA14 | LCDRS | EXP1_4 |
| PD0 | LCDD4 | EXP1_5 |
| PD1 | LCDD5 | EXP1_6 |
| PD4 | LCDD6 | EXP1_7 |
| PD2 | LCDD7 | EXP1_8 |
| PB4 | LCDMISO | EXP2_1 |
| PB3 | LCDSCK | EXP2_2 |
| PD7 | BTNEN2 | EXP2_3 |
| PB6 | LCDSS | EXP2_4 |
| PD6 | BTNEN1 | EXP2_5 |
| PB5 | LCDMOSI | EXP2_6 |
| PD5 | LCDCD | EXP2_7 |