Fly Gemini V3 TFT Display | Mellow Products Documentation

Installing the TFT display

Edit me

Dimensions

Installing the TFT Display

Note: Before starting to set up the TFT display, confirm that you have read and completed the Fly OS system setup

Edit the FLY-config.conf file

Open an SSH or telnet session to your Fly-Gemini V3
CD to the /boot folder
```
cd /boot
```
Edit the FLY-config.conf file
```
sudo nano FLY-Config.conf
```
Find the line KlipperScreen=false and change it to KlipperScreen=true

Fly-Config Enable Klipper Screen
Find the line Display=NONE and change it to Display=FBTFT

Fly-Config set display to TFT
Press CTRL + X and save the changes to the FLY-config.conf file

Assemble the TFT wiring harness

The SBC plugs need to be added to the wiring harness. Follow the wiring diagram for your board.
- Fly-Gemini V3 TFT wiring diagram
  
  Gemini V2 TFT wiring

Connect the TFT wiring harness to the Fly-Gemini V3

Insert the 3 TFT wiring harness connectors to the Fly-Gemini V3 as shown.

Gemini V2 TFT sockets
Power on the Fly-Gemini V3 and wait for the display to start.

Note: It will take few minutes to boot up for the first time after modifying Display settings. Give it time for the system to configure the display and start up.

Links

Tags: