General information regarding the Fly-SB2040-V2
Edit me

Fly-SB2040-V2 Overview

Description

The Fly-SB2040-V2 toolboard uses CAN communication to connect the host computer with a UTOC board, other USB to CAN adapters, Pi Hats, USB to CAN Bridge Mode in Klipper or USB. For USB use it is recommended to not to use a cable that exceeds 1 meter ( 3.2 feet ) in length.
The Fly-SB2040-V2 is available from AliExpress

Fly-SB2040-V2 Front and Rear view
Fly-SB2040-V2 Front and Rear view

Product Features

  • CANbus connection for stable data transmission over long distaces.
  • 24 volt max input
  • 5 amp mosfet for heater control
  • Onboard TMC2209 driver for the extruder
  • Onboard ADXL345 accelerometer to measure resonance for input shaper.
  • 3 controllable fans.
  • RGB Led control
  • Peripheral interface:USB1, CAN1, FAN3, RGB1, Servo1, Probe1, EndStop3, Thermal1, Heater*1
  • Optional MAX31865 to support PT100
  • 5V anti-backflow
Fly-SB2040-V2 dimensions
Fly-SB2040-V2 dimensions

BOM

Fly-SB2040-V2 BOM
Fly-SB2040-V2 BOM

Included parts

  • Fly-SB2040-V2 Board
  • Heatsink for 2209 driver
  • Jumpers * 2
  • JST-PH plugs and Female Crimp Terminals
  • Microft plug and Crimp Terminals
  • XT30+2 3 meter 4 wire harness
  • USB-A to USB-C Cable
Tags: