Fly-Super8Pro H723 Pin map
Edit me
Fly-Super8Pro H723 Pinout Diagram
Fly-Super8Pro H723 Driver Pins in Firmware
Driver pin numbers. They are separated into driver number.
| Pin Type | 0(X) | 1(Y) | 2(Z) | 3(E0) | 4(E1) | 5(E2) | 6(E3) | 7(E4) |
|---|---|---|---|---|---|---|---|---|
| Enable Pins | PF11 | PF14 | PG1 | PE9 | PF2 | PC15 | PG4 | PG7 |
| Step Pins | PE2 | PE3 | PE4 | PE14 | PE15 | PE1 | PE0 | PE6 |
| Direction Pins | PC5 | PF13 | PG0 | PE8 | PE11 | PF0 | PG3 | PG6 |
| UART Pins | PC4 | PF12 | PF15 | PE7 | PE10 | PF1 | PG2 | PG5 |
Fly-Super8Pro H723 Other Pins in Firmware
If more than one pin name is availble, either name can be used in the firmware (config.g).
If the pins aren’t in the table (due to not having a special name), then the pin itself can be used in the form of PA0, PA.0, PA_0, A0, A.0 or A_0.
| Pin Number | Pin Name 1 | Pin Name 2 | Pin Name 3 | Klipper Alias |
|---|---|---|---|---|
| PA0 | fan0 | FAN0 | ||
| PA1 | fan1 | FAN1 | ||
| PA10 | RX1 | |||
| PA15 | fan4 | FAN4 | ||
| PA2 | fan2 | FAN2 | ||
| PA3 | fan3 | FAN3 | ||
| PA4 | LCD_SS | EXP2_4 | ||
| PA5 | LCD_SCK | EXP2_2 | ||
| PA6 | LCD_MISO | EXP2_1 | ||
| PA7 | LCD_MOSI | EXP2_6 | ||
| PA8 | io6 | |||
| PA9 | TX1 | |||
| PB0 | heat0 | HEAT0 | ||
| PB1 | heat1 | HEAT1 | ||
| PB10 | fan6 | FAN6 | ||
| PB11 | fan5 | FAN5 | ||
| PB2 | LCD_EN | EXP1_3 | ||
| PB3 | MOT_SCK | |||
| PB4 | MOT_MISO | |||
| PB5 | MOT_MOSI | |||
| PB6 | BTN_EN2 | EXP2_5 | ||
| PB7 | BTN_EN1 | EXP2_3 | ||
| PC0 | ADC_4 | out4 | HEAT4_TEMP | |
| PC1 | ADC_5 | out5 | BED_TEMP | |
| PC13 | LCD_D5 | EXP1_6 | ||
| PC14 | LCD_D4 | EXP1_5 | ||
| PC3 | probe | PROBE | ||
| PC6 | pwm_out0 | pwm0 | out0 | SERVO |
| PC7 | heat2 | HEAT2 | ||
| PD12 | fan7 | FAN7 | ||
| PD14 | fan8 | FAN8 | ||
| PD15 | fan9 | FAN9 | ||
| PD6 | io5 | |||
| PD7 | io4 | |||
| PE12 | BEEP | EXP1_1 | ||
| PE13 | BTN_ENC | EXP1_2 | ||
| PE5 | bedout | bed | BED_OUT | |
| PF3 | hvin | |||
| PF4 | ADC_0 | out0 | HEAT0_TEMP | |
| PF5 | ADC_1 | out1 | HEAT1_TEMP | |
| PF6 | heat4 | HEAT4 | ||
| PF7 | heat3 | HEAT3 | ||
| PF8 | in7 | pwm_out1 | pwm1 | out1 |
| PF9 | ADC_2 | pwm_out2 | pwm2 | HEAT2_TEMP |
| PF10 | ADC_3 | out3 | HEAT3_TEMP | |
| PG10 | io2 | E_STOP | ||
| PG11 | io1 | Y_STOP | ||
| PG12 | io0 | X_STOP | ||
| PG13 | LCD_D7 | EXP1_8 | ||
| PG14 | LCD_D6 | EXP1_7 | ||
| PG15 | LCD_CD | EXP2_7 | ||
| PG8 | LCD_RS | EXP1_4 | ||
| PG9 | io3 | Z_STOP | ||
| <GND> | GND | EXP1_9 | ||
| <GND> | GND | EXP2_9 | ||
| <5V> | 5 VOLTS | EXP1_10 | ||
| <5V> | 5 VOLTS | EXP2_10 | ||
| <RST> | RESET | EXP2_8 |